M150
8DIN+4AIN+4DO Remote IO Module (MQTT, Modbus)
The M150 is designed for IIOT Application and Industrial Automation, it provides 8DIN+4AIN+4DO, compatible with MQTT, Modbus RTU, Modbus TCP protocols, equips 1-2 Ethernet ports and 1 RS485 port.
- T Version: 1*RJ45+1RS485+8DIN+4AIN+4DO
- E Version: 2*RJ45+1RS485+8DIN+4AIN+4DO
The M150 Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.
The M150 Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 700Khz high speed pulse counter, 4 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal, 4 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.
The M150 Ethernet Remote I/O module can work at 12~36VDC with anti-reverse protection design. Also, it provides 1channel 12~36VDC power output for external device to save wiring cost.
1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;
2. Power supply 12~36VDC with over voltage and phase-reversal protection;
3. Management and configuration via LAN connection configuration software for easy operation and maintenance;
4. Support Web real-time monitoring and Web debugging;
5. DO1 support PWM output;
6. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;
7. 8 optical isolated digital input, supports max. 700Khz high speed pulse counter;
8. 4 digital output or relay output, supports 10Hz~300KHz high speed pulse output;
9. 4 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC;
10. High sampling frequency and special filtering strategy to ensure reliability;
11. 1 RS485 Serial port, supports Modbus RTU Master or Slave, can extend I/O modules;
12. Supports register mapping function and extend I/O inquiry strategy;
13. Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;
14. LED instructions work status, with reset button to reset, easy on-site installation and commissioning;
15. Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;
16. Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
M150T Specifications
|
Ethernet Remote I/O Module Specifications |
|
| • Digital Input | |
| Sensor Type | Wet Contact (NPN or PNP), Dry Contact |
| I/O Mode | DI or Event Counter |
| Dry Contact | • On: short to GND=1 • Off: open=0 |
| Wet Contact (DI to COM) | • On: 10 to 30 VDC=1 • Off: 0 to 3 VDC=0 |
| Counter Frequency | Max. 700kHz(Only the 1st Channel can be used as high speed pulse counter) |
| Digital sampling frequency | 500Hz |
| Digital filtering strategy | Continues 3 times |
| Isolation | Optical Isolated,3k VDC or 2k Vrms |
| • Digital Output | |
| Type | Sink |
| I/O Mode | DO or Pulse Output |
| Pulse Output Frequency | 10Hz~300KHz(Only the 1st Channel can be used as high speed pulse outputs) |
| Over-Voltage Protection | 50 VDC |
| Over-Temperature Shutdown | 175°C (typical), 150°C (min.) |
| Load Current | Max. 500 mA per channel |
| Digital sampling frequency | 500Hz |
| Isolation | If DO is Sink type, then no isolation. If it is Relay, then is electrical isolation. |
| • Analog Input | |
| Type | Differential input |
| Resolution | 12 bits |
| I/O Mode | Voltage / Current (jumper selectable) |
| Input Range | 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA |
| Accuracy | ±0.1% FSR @ 25°C ±0.3% FSR @ -10 and 60°C ±0.5% FSR @ -40 and 75°C |
| Sampling frequency | 20Hz |
| Built-in Resistor for Current Input | 162 ohms |
| Isolation | Electrical isolation |
| • Working Power Requirements | |
| Input Voltage | 12~36VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W; |
| Input Current | 139 mA @ 24 VDC |
| • Power Output | |
| Output Voltage | 12~36VDC |
| Output Current | 139 mA @ 24 VDC |
| • LAN | |
| Ethernet | 10/100 Mbps, RJ45 ports |
| Protection | 15KV ESD Protection |
| Protocols | Modbus TCP, TCP/IP,MQTT,TCP Server,TCP Client |
| Max. TCP Connection | 5 |
| • Serial Port | |
| RS485 | MODBUS- RTU Protocol |
| Protection | 15KV ESD Protection |
| Modbus Slave address | 1~255 |
| Baud Rate | 1200,2400,4800,9600,19200,38400,57600,115200,128000Bps; |
| Mapping registers | Bit Type: 300 Registers, 16-Bit Type: 300 Registers. |
| • Physical Characteristics | |
| Wiring | I/O cable max. 14 AWG |
| Dimensions | 105 x 88 x 30 mm |
| Weight | Under 205 g |
| Mounting | DIN rail or wall |
| • Environmental Limits | |
| Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Altitude | Up to 3000 m |